Mosaic Bathroom Tile Roll| Beige Stone| 25x25mm| 1000 x 500mm

Key Features:

Technical Specifications

Material: Indian sedimentary rock with polycarbonate treatment
Grout Line: 3mm spacing for secure bonding and aesthetic consistency
Weight: Approximately 2.5kg per roll
Surface Finish: Riven (textured) for enhanced slip resistance
Installation Method: Bonds with C2-type cement-based tile adhesive (flexible adhesive recommended for floors and wet areas)
Water Resistance: Fully waterproof when sealed, ideal for showers and wet rooms
Load Capacity: Suitable for low to moderate foot traffic; avoid heavy point loads (e.g., wheelchairs, ladders) on floors
Slip Rating: Naturally non-slip due to texture (formal rating not specified; consult manufacturer for heavy-use floors)
Coverage: One roll covers 0.5 square meters
Cutting: Can be trimmed with a wet tile saw or angle grinder for precise fitting
Sealing: Recommended to seal grout lines post-installation for enhanced durability and stain resistance

Installation Guidelines

Surface Prep: Ensure substrates (walls or floors) are clean, level, and stable.
Adhesive: Use a flexible C2 cement-based adhesive for floors or wet areas; standard adhesive suffices for dry walls.
Application: Apply adhesive with a notched trowel, press the roll firmly, and ensure even contact. Cut rolls as needed for edges or curves.
Grouting: Use flexible, waterproof grout suitable for 3mm joints. Apply 24 hours after tiling.
Sealing: Seal grout lines after curing to maintain waterproofing, especially for floors.
Floor Use: Confirm substrate suitability for underfloor heating or high-traffic areas. Avoid point loads on 25x25mm tiles.

Ideal For

Technical Data